tradedesk.rbtrading.site / tools / perp position size calculator

How do I calculate position size on perps?

Perp position size = the cash you will risk ÷ the stop distance in price, counted in units of the asset. Risk $250 on an S&P 500 perp long at 7,404.5 with the stop at 7,350 and the size is 250 ÷ 54.5 = 4.587 units, or 4.040 once a 0.05% fee each side is counted. Leverage does not change that number: it only decides how much margin the trade ties up.

By RB Trading · Updated 19 Nov 2026 · Educational analysis, not financial advice
Perp position size calculator
4.040 units risking $249.98 with fees
Direction, from the stopLong
Position value$29,914
Margin at 5x$5,983
Margin, share of the account24%
Fees to open and close$29.80
Stop distance, 0.74%54.50
A 1.00 move on this size$4.04
Liquidation, approx5,960.6

Leverage changes the margin, never the risk: at 5x or 10x this size still loses $249.98 at the stop. The size is cut a little so the fees fit inside the risk.

The formula

units = (account × risk %) ÷ (stop distance + fees per unit)  ·  margin = units × entry ÷ leverage

A perpetual future is sized in units of what it tracks: coins of bitcoin or ether, ounces of gold, units of an index. On almost every USDT or USD margined perp one unit gains or loses $1 for each full point the price moves, so a stop 54.5 points away costs $54.50 a unit. Divide the cash you will risk by that and you have the size. The fees are charged on the full position value when you open and again when you close, so the calculator takes them out of the risk first: that is why 4.587 units becomes 4.040 at a 0.05% fee.

Worked examples

A $25,000 account risking 1%, so $250 a trade, at 5x leverage and a 0.05% fee each side. Sizes round down to a 0.001 step, so no trade risks more than $250 with its fees.

TradeStop distanceSizePosition valueMargin at 5xFees
S&P 500 long54.5 (0.74%)4.040 units$29,914$5,983$29.80
Bitcoin long3,000 (3.00%)0.080 units$8,000$1,600$7.88
Gold short29.0 (0.77%)7.631 units$28,563$5,713$28.67
Ether long140 (4.00%)1.743 units$6,101$1,220$5.98
Bitcoin: entry 100,000, stop 97,000. Gold: entry 3,743, stop 3,772. Ether: entry 3,500, stop 3,360. Fees are the open on the entry and the close at the stop.

Compare the S&P 500 and bitcoin rows. The index stop is 0.74% away, so the same $250 buys a position worth $29,914, 1.2 times the account. The bitcoin stop is 3% away, so the position is only $8,000. Both lose $250 at the stop. A tight stop means a big position and needs leverage to open; a wide stop means a small one. The size comes from the stop, never from the leverage slider.

The fees tell the same story. On the tight index stop they come to $29.80, about 12% of the risk, so they cost 0.547 units of size. On the wider bitcoin stop they are $7.88. The tighter the stop, the more the fee per side matters.

What leverage actually changes

The same bitcoin trade, the same 0.080 BTC and the same $250 at the stop, at five different leverage settings:

LeverageMarginOf the accountLiquidation, approxHit before the stop?
2x$4,00016.0%50,500No
5x$1,6006.4%80,500No
10x$800.003.2%90,500No
20x$400.001.6%95,500No
50x$160.000.6%98,500Yes
Liquidation is the isolated-margin estimate. 0.5% maintenance margin, fees left out of the liquidation estimate. Your platform’s own liquidation price always wins.

Higher leverage frees margin for other trades and does nothing to the risk, until the liquidation price moves inside the stop. At 20x the estimate sits at about 95,500, just beyond the 97,000 stop; at 50x it is about 98,500, so the position would be closed by the exchange before the stop ever traded. Use the least leverage that lets the size open, and check the liquidation price sits well beyond the stop.

The liquidation price

long ≈ entry × (1 − 1 ÷ leverage + maintenance %)  ·  short ≈ entry × (1 + 1 ÷ leverage − maintenance %)

On an isolated position, the margin you put up is all the exchange will let the trade lose before it closes it, less a small maintenance margin it keeps back. At 10x the margin is a tenth of the position, so a move of a little under 10% against you ends the trade. Cross margin uses the whole account balance as the buffer, which pushes the liquidation further away but puts the whole balance behind one trade. Prop firm perps accounts usually close you at the firm’s loss limits long before any of this, so on those the daily and maximum loss floors matter more than the liquidation price.

Fees and funding

Two costs come with every perp. The trading fee is a percentage of the position value, charged to open and to close: taker fees on crypto exchanges are commonly a few hundredths of a percent, and some prop platforms charge less. On a tight stop the fees can be a tenth of the risk, so count them. Funding is paid between longs and shorts at set times, on the full position value: at 0.01% three times a day, the 0.080 BTC long pays about $2.40 a day, $16.80 over a week if the rate held. The second calculator works it out for your size and rate.

Perp funding calculator
−$2.40 a day, long (a cost)

Funding is paid every 8 hours: −$0.80 each time on a position worth $8,000. Held 7 days: about −$16.80, if the rate stayed where it is.

That rate runs at 11.0% a year. Funding changes every interval, so this is an estimate: read the live rate on your platform before you hold.

The 25% button is not 25% risk

Perp order tickets offer 25%, 50%, 75% and Max. Those are shares of the most you can open at your leverage and free margin, not shares of your account and not a risk. On a $25,000 account at 5x, 25% of the maximum is a position worth about $31,000, and what it loses at the stop depends entirely on where the stop is. Work the units out from the stop and type them in.

Before you place it

For lots on CFDs and forex use the position size calculator; for the daily and maximum loss left on a prop account, the prop firm drawdown calculator. The full guide to trading perps on a prop firm account walks through the rules.

This week’s setups are already mapped

Every Sunday before the open: analysed swing setups across stocks, forex, gold and crypto with the exact entry, stop and target, an alert when one triggers, the live dashboard and the paid Substack letters.

Get this week’s setups
$29/mo · or $199/yr, 20% off the annual · paid Substack letters included · cancel anytime
Or open the free section first: email only, no card

FAQ

How do you calculate position size for perpetual futures?

Divide the cash you will risk by the stop distance in price. That gives units of the asset. $250 at risk with a 54.5 point stop is about 4.587 units; take a little off for the fees. Leverage is not part of the sum.

Does higher leverage mean more risk on perps?

Not by itself. With the same size and stop, 5x and 20x lose the same at the stop. Higher leverage only lowers the margin and brings the liquidation price closer, and if it comes inside the stop the trade is closed before the stop.

How is the liquidation price calculated?

For an isolated long, roughly entry × (1 − 1 ÷ leverage + maintenance margin); for a short, entry × (1 + 1 ÷ leverage − maintenance margin). At 10x a long is liquidated a little under 10% below the entry. Exchanges add fees and tiers, so read the figure your platform shows.

How does funding work on a perp?

At set times, often every 8 hours, longs and shorts pay each other a rate on the full position value. A positive rate means longs pay shorts. A $50,000 position at 0.01% pays $5 each time.

What leverage should I use on a perp?

The least that lets your size open with room to spare. Choose the size from your stop first, then pick leverage so the margin fits and the liquidation price sits well beyond the stop.

Keep readingPosition size calculator · Prop firm drawdown calculator · Swap fee calculator · Gold and index lot size calculator · Perps on a prop firm account · All calculators